403.844.2141 info@tomco.ca

TOMCO INDUSTRIAL LTD.

ID MOUNT FLANGE FACERS

Climax offers a wide variety of rugged and innovative portable flange facers for 1 to 120 inch (25 to 3050 mm) diameters, for ID or OD mounting. Several of our machines can be configured for facing, milling or both, and many of our models reface, mill, bevel, square, counterbore, or cut end-prep configurations for welding. For easy setup, smaller units use an integral mandrel to quickly lock into place, while the larger units can be installed with a separate mount or chuck to which the facer body is installed.

FF3000 FLANGE FACER

Facing Diameters:
1.5 – 12 inches (38.1 – 304.8 mm)
Milling Diameters:
N/A
ID Mounting Diameters:
1.5 – 6.75 inches (38.1 – 171.5 mm)
Power Options:
Pneumatic

FF4000 FLANGE FACER

Facing Diameters:
3 – 19 inches (76.2 – 482.6 mm)
Milling Diameters:
N/A
ID Mounting Diameters:
3 – 12.5 inches (76.2 – 317.5 mm)
Power Options:
Pneumatic

FF5000 FLANGE FACER

Facing Diameters:
5 – 24 inches (127 – 609.6 mm)
Milling Diameters:
N/A
ID Mounting Diameters:
5 – 18 inches (88.9 – 457.2 mm)
Power Options:
Pneumatic

FF6300 FLANGE FACER

Facing Diameters:
11.8 – 60 inches (299.7 – 1524.0 mm)
Milling Diameters:
N/A
ID Mounting Diameters:
11.8 – 57.5 inches (299.7 – 1460.5 mm)
Power Options:
Pneumatic Hydraulic

FF7200 FLANGE FACER

Facing Diameters:
30 – 72 inches (762 – 1828.8 mm)
Milling Diameters:
35 – 72 inches (889 – 1828.8 mm)
ID Mounting Diameters:
30 – 72 inches (762 – 1828.8 mm)
Power Options:
Pneumatic,Hydraulic

FF8200 FLANGE FACER

Facing Diameters:
45 – 120 inches (1143 – 3048 mm)
Milling Diameters:
45 – 120 inches (1143 – 3048 mm)
ID Mounting Diameters:
45 – 120 inches (1143 – 3048 mm)
Power Options:
Pneumatic,Hydraulic

ID MOUNT FLANGE FACERS

Choose from four models to perform accurate flange reconditioning from 0.75 – 16.25 inches (19.1 – 412.8 mm). Surface finishes can be adjusted between 63 and 250 RMS for the model BF and between 63 and 500 RMS for the MSF MTF and MFTF.

MODEL BF

Flange Range: .75 – 4.12″ (19.1 mm – 104.6 mm)

MODEL MSF

 

Working Range: 1.25″ I.D. – 6.19″ O.D. (31.8mm – 157.2 mm)

MODEL MTF

 

Working Range: 3.25″ I.D. – 10.63″ O.D. (82.6mm – 270.0 mm)

 MODEL MFTF

 

Flange Reconditioning Range: 4.250″ – 16.250″ (19.1 mm – 412.8 mm)